RailFanAZ.com News

This site is FREE of charge.  However, the development and maintenance of this site, Remote Systems and RoboFoamer takes a significant amount of time to put together and maintain, with raising ISP and Server Costs as well. If you like what you see please help support our site by making a donation. Enjoy and Thank you for all your continued support!
Donations will show going to "RailFan /w MyTeggyPC", that is us. We are now RailFanAZ.com.

Please note that your donations are not tax-deductible.

Thanks in advance for your generosity!

Railroad Radio Feeds

Author Topic: ATCS Monitoring - BNSF Seligman - Scheduled Downtime (11/10/2018)  (Read 274 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeff R

  • Administrator
  • Hero Member
  • *****
  • Join Date: Jan 2017
  • Posts: 2505
  • Location: Mesa, AZ
    • RailFanAZ.com
On 11/10/2018, Christina and I will be going out to Parks and Flagstaff for some maintenance on the ATCS sites.  Below is the tentative plan:

Downtime: 4:00pm - 7:00pm Estimated

1) Flagstaff Area - Test out different antennas and radios to see which give us the best signal out there with BCP Signals planned.
2) Parks Area - Swapping the PC to higher performance to handle SDR Integration for use with the BCP Signals or Install Radio to Get the BCP Signals.

This post will be updated as we progress through the sites:
https://www.railfanaz.com/index.php?topic=4419.0

If you would like to receive further alerts of ATCS Monitoring here in Arizona, please reply to this post to get automatic updates.
« Last Edit: November 09, 2018, 04:00:11 pm by Jeff R »
Jeff Rossi
RailFanAZ.com Webmaster | ATCS Server Host for BNSF Arizona and Parts of UP Arizona.

https://www.railfanaz.com

Offline Jeff R

  • Administrator
  • Hero Member
  • *****
  • Join Date: Jan 2017
  • Posts: 2505
  • Location: Mesa, AZ
    • RailFanAZ.com
Re: ATCS Monitoring - BNSF Seligman - Scheduled Downtime (11/10/2018)
« Reply #1 on: November 10, 2018, 10:29:18 pm »
Just got back to Mesa.  Flagstaff is looking better on reception of the data.  BCPs are coming in clear.  Still working on the MCP signal.
Jeff Rossi
RailFanAZ.com Webmaster | ATCS Server Host for BNSF Arizona and Parts of UP Arizona.

https://www.railfanaz.com

Offline Jeff R

  • Administrator
  • Hero Member
  • *****
  • Join Date: Jan 2017
  • Posts: 2505
  • Location: Mesa, AZ
    • RailFanAZ.com
Re: ATCS Monitoring - BNSF Seligman - Scheduled Downtime (11/10/2018)
« Reply #2 on: November 11, 2018, 05:28:08 pm »
Christina and I did the following tests.  Walked around the area for 2 hours at different spots of the host site.  Christina mentioned by her observation lets try the fence which is about 20 feet SW of the house and original location of the antenna.  Using NO Pre-AMP, just the antenna and the laptop, we were picking up Flag W to Winslow E MCP indications (Not Controls).  There were only a couple of dead spots but looked better.  I placed the laptop on the ground and let is sit for 1 hour to test it.  Error rate was down to 20% and most of the MCPs were coming in pretty good, better than on the roof.
 
Checked the PC and Swapped the SDR with two Pro97s (MCP and BCP) radios.  Still not seeing anything.
 
We moved the main antenna at that spot close as possible (cable to short at the moment, the host is going to see if he can get more cable slack).
 
More to come as we work on this site a little more closely.
Jeff Rossi
RailFanAZ.com Webmaster | ATCS Server Host for BNSF Arizona and Parts of UP Arizona.

https://www.railfanaz.com